A 3-pack bundle containing a two-sided dakimakura, an acrylic keychain, and a 3D wrist support mouse pad.
Two-Sided Dakimakura Cover
A two-sided dakimakura cover made from a 2WT (Two-way tricot) material. It’s elastic, has a smooth surface, and is not easy to wrinkle. It portrays Shuu in two different outfits for each side while he lays on a blanket; he wears his normal outfit on the front, and he wears an alternate outfit with shorts, a hoodie, and thigh highs on the back. It measures 50cm*160cm. It has a different design for the front and back. Packaged in a simple plastic packaging as displayed above. Pillow not included.
Material: 2-Way Tricot
Care InstructionsCare: It may be damaged if washed by machine, so it’s best to wash by hand. If machine washing and/or drying, turn it inside out before putting it in the machine. The temperature of the water should be below 30 degrees celsius. DO NOT use chlorine or bleach during wash. Use a light to medium wash and iron at low temperature. Wash it separately from other items to prevent color transfer. Don’t leave it in a wet state after washing. Wring it dry. Avoid spin-dry and avoid using a dryer to tumble dry.
To provide the best protection for your dakimakura, you are recommended to hand wash it. Below is a step by step washing guideline:
1: Remove the dakimakura cover from pillow body.
2: Fill the wash basin/sink/tub with COLD water, dump in the detergent.
3: Immerse the dakimakura in the cold water, get it nice and soapy. GENTLY brush it with a little toothbrush if there is any dirt or spots on it.
4: Let it soak for about 20 minutes.
5: Dump the water, rinse the dakimakura well and wring it dry as best you can.
6: Hang it up to dry for 8-12 hours.
7: Your dakimakura should now be clean.
3D Wrist Support Mousepad
A 3D wrist support mouse pad with a rubbery base for and printed fabric. It portrays Shuu laying in bed in front of the viewer in shorts, thigh highs, and his usual sweater. Packaged in a plastic ziploc bag as shown in the reference image.
Material: Rubber Bottom + Fabric Surface
An acrylic keychain with single side epoxy and double side printing. It is smooth to the touch and measures roughly 2 inches. It has a star shaped clasp to represent shuu’s community, shuuting stars. It portrays Shuu in chibi form eating a maple donut with the word “nom” on the side. Packaged in simple plastic packaging.
Material: Acrylic Plastic
There is a protective plastic covering the acrylic keychain as well as the base of the mouse pad. Remove if desired.
All leftover merchandise is expected to ship within 7 business days of the purchase.
The main product images is a mockup for reference purposes. Actual items may differ slightly.